ICL5101_16 Datasheet, PDF (34/44 Pages) Infineon Technologies AG – Resonant controller IC with PFC for LED driver

3.3
Characteristics Power Supply Section
ICL5101
Electrical Characteristics
Note: The electrical characteristics involve the spread of values given within the specified supply voltage and junction
temperature range T_J from -40 °C to 125 °C. Typical values represent the median values, which are given in
reference to 25 °C. If not otherwise stated, a supply voltage of 15 V and V_HSVCC = 15 V is assumed and the IC
operates in active mode. Furthermore, all voltages refer to GND if not otherwise mentioned.
Parameter
VCC Quiescent Current1
VCC Quiescent Current2
VCC Supply Current ¹⁾
VCC Supply Current in
Latched Fault Mode
LSVCC Turn-On Threshold
LSVCC Turn-Off Threshold
LSVCC Turn-On/Off Hyst.
VCC Zener Clamp Voltage
VCC Zener Clamp Current
High Side Leakage Current
HSVCC Quiescent Current
HSVCC Quiescent Current¹⁾
HSVCC Turn-On Threshold
HSVCC Turn-Off Threshold
HSVCC Turn-On/Off Hyst.
Low Side Ground
Symbol
I_VCCqu1
I_VCCqu2
I_VCCSupply
I_VCCLatch
V_VCCOn
V_VCCOff
V_VCCHys
V_VCCClamp
I_VCCZener
I_HSGNDleak
I_HSVCCqu12)
I_HSVCCqu22)
V_HSVCCOn2)
V_HSVCCOff2)
V_HSVCCHy2)
GND
Limit Values
min. typ. max.
—
90 130
—
120 160
—
4.2 6.0
—
110 170
13.48 14.0 14.5
10.0 10.6 11.0
3.2 3.6 4.0
15.5 16.3 16.9
2.5
— 5.05
— 0.01 2
—
190 280
0.26 0.65 1.2
9.75 10.4 11.0
8.08 8.6 9.3
1.4 1.7 2.03
Unit
Test Condition
µA V_VCC = V_VCCOff – 0.5V
µA V_VCC = V_VCCOn – 0.5V
mA V_PFCVS > 2.725V
µA V_OTP = 5V
V
V
V Hysteresis
V I_VCC = 2mA/V_OTP = 5V
mA V_VCC = 17.5V/V_OTP = 5V
µA V_HSGND = 650V, V_GND=0V
µA V_HSVCC = V_HSVCCOn – 0.5V
mA V_HSVCC > V_HSVCCOn
V
V Hysteresis
V
1) _{With inactive gate}
2) _{Refers to high-side ground (HSGND)}
3.4
Characteristics of PFC Section
3.4.1
PFC Current Sense (PFCCS)
Parameter
Turn-off threshold
Overcurrent blanking +
propagation delay¹⁾
Leading-edge blanking
PFCCS bias current
1) _{Propagation Delay = 50 ns}
Symbol
V_PFCCSOff
t_PFCCSOff
t_Blanking
I_PFCCSBias
Limit Values
min. typ. max.
0.95 1.0 1.05
140 200 262
180
- 0.5
250 315
— 0.5
Unit
Test Condition
V
ns
ns
Pulse width when V_PFCCS
> 1.0V
µA V_PFCCS = 1.5V
Datasheet
34
Rev. 1.3, 2016-01-15