TLE6251-3G Datasheet, PDF (32/36 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

TLE6251-3G
Application Information
11.2
ESD Robustness according to IEC61000-4-2
Test for ESD robustness according to IEC61000-4-2 “Gun test” (150 pF, 330 Ω) have been performed. The results
and test conditions are available in a separate test report.
Table 8 ESD Robustness according to IEC61000-4-2
Performed Test
Result Unit
Electrostatic discharge voltage at pin V_S, CANH, ≥ 9
kV
CANL and WK versus GND
Electrostatic discharge voltage at pin V_S, CANH, ≤ −9
kV
CANL and WK versus GND
Remarks
1)_{Positive pulse}
1)_{Negative pulse}
1) ESD susceptibility “ESD GUN” according to “Gift ICT Evaluation of CAN Transceiver “Section 4.3. (IEC 61000-4-2:
2001-12) -Tested by external test house (IBEE Zwickau, EMC Testreport Nr. 07a-04-09 referenced to the TLE6251-2G).
11.3
Voltage Drop over the INH Output
Voltage Drop on the INH output pin
1,00
Voltage Drop (V)
T_J = 150°C
T_J = 25°C
T_J = -40°C
0,00
0,00
1,00
2,00
3,00
4,00
5,00
INH Output Current (mA)
Figure 17 INH output voltage drop versus output current (typical values only!)
Data Sheet
32
Rev. 1.1, 2011-06-06