TLE6251-3G Datasheet, PDF (24/36 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

TLE6251-3G
General Product Characteristics
9
General Product Characteristics
9.1
Absolute Maximum Ratings
Table 4 Absolute Maximum Ratings ¹⁾
All voltages with respect to ground, positive current flowing into pin
(unless otherwise specified)
Pos. Parameter
Symbol Limit Values Unit Conditions
Min. Max.
Voltages
9.1.1 Supply voltage
9.1.2 Transceiver supply voltage
9.1.3 Logic supply voltage
9.1.4 CANH DC voltage versus GND
9.1.5 CANL DC voltage versus GND
9.1.6 Input voltage at WK
9.1.7 Input voltage at INH
9.1.8 Differential voltage CANH to
CANL
V_S
-0.3
V_CC
-0.3
V_IO
-0.3
V_CANH
-40
V_CANL
-40
V_WK
-27
V_INH
-0.3
V_Diff,CAN -40
40
V
6.0
V
6.0
V
40
V
40
V
40
V
V_S + 0.3 V
40
V
–
–
–
–
–
–
–
Max. differential voltage
between CAN and CANL
9.1.9 Logic voltages at EN, NSTB,
V_Logic
-0.3
V_IO
NERR, TxD, RxD
V 0 V < V_IO < 6.0 V
Currents
9.1.10 Maximum Output Current INH I_INH(max) -5
0
Temperatures
mA –
9.1.11 Junction Temperature
9.1.12 Storage Temperature
ESD Susceptibility
T_j
-40
T_stg
-55
9.1.13 ESD Resistivity at CANH, CANL, V_ESD
-8
and WK versus GND
9.1.14 ESD Resistivity all other pins
V_ESD
-2
150
°C –
150
°C –
8
kV HBM²⁾ (100 pF / 1.5 kΩ)
2
kV HBM²⁾ (100 pF / 1.5 kΩ)
1) Not subject to production test, specified by design.
2) ESD susceptibility, HBM according to AEC-Q100-002D.
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the
data sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are
not designed for continuous repetitive operation.
Data Sheet
24
Rev. 1.1, 2011-06-06