TLE6251-3G Datasheet, PDF (29/36 Pages) Infineon Technologies AG – High Speed CAN-Transceiver with Wake and Failure Detection

TLE6251-3G
Electrical Characteristics
Table 7 Electrical Characteristics (cont’d)
4.75 V < V_CC < 5.25 V; 3.0 V < V_IO < 5.25 V; 5.5 V < V_S < 18 V; R_L = 60 Ω; normal mode; -40 °C < T_j < 150 °C; all
voltages with respect to ground; positive current flowing into pin; unless otherwise specified.
Pos. Parameter
Symbol Limit Values Unit Conditions
Min. Typ. Max.
Dynamic CAN-Transceiver Characteristics
10.1.46 Propagation delay
TxD-to-RxD LOW
(“Recessive” to “Dominant”)
t_d(L),TR –
150 255 ns C_L = 100 pF;
V_CC = V_IO = 5 V; C_RxD = 15 pF
10.1.47 Propagation delay
t_d(H),TR –
TxD-to-RxD HIGH (“Dominant”
to “Recessive”)
150 255 ns C_L = 100 pF;
V_CC = V_IO = 5 V; C_RxD = 15 pF
10.1.48 Propagation delay
t_d(L),T
–
TxD LOW to bus “Dominant”
10.1.49 Propagation delay
t_d(H),T
–
TxD HIGH to bus “Recessive”
10.1.50 Propagation delay
t_d(L),R
–
bus “Dominant” to RxD “Low”
10.1.51 Propagation delay
t_d(H),R
–
bus “Recessive” to RxD “High”
10.1.52 Min. hold time go to sleep
command
t_hSLP
8
50 120 ns C_L = 100 pF;
V_CC = V_IO = 5 V; C_RxD = 15 pF
50 120 ns C_L = 100 pF;
V_CC = V_IO = 5 V; C_RxD = 15 pF
100 135 ns C_L = 100 pF;
V_CC = V_IO = 5 V; C_RxD = 15 pF
100 135 ns C_L = 100 pF;
V_CC = V_IO = 5 V; C_RxD = 15 pF
25 50 μs –
10.1.53 Min. wake-up time on pin WK t_WK(local) 5
10 20
10.1.54 Min. “Dominant” time for bus t_Wake 0.75 3
5
wake-up
μs –
μs –
10.1.55 TxD permanent “Dominant” t_TxD
disable time
0.3 0.6 1.0 ms –
10.1.56 Bus permanent time-out
t_Bus,t
0.3 0.6 1.0
10.1.57 V_CC, V_µC undervoltage filter
time
t_UV(VIO) 200
t_UV(VCC)
320
480
10.1.58 Time for mode change
t_Mode
–
20 –
1) Not subject to production test, specified by design.
ms –
ms –
μs ¹⁾
Data Sheet
29
Rev. 1.1, 2011-06-06