TLE4997 Datasheet, PDF (26/36 Pages) Infineon Technologies AG – Programmable Linear Hall Sensor for Industrial Use

TLE4997I
Error Detection
7.3
Not Correctable EEPROM Errors
The parity method is able to correct one single bit in one EEPROM line. One other single
bit error in another line can also be detected. As this situation is not correctable, this
status is signalled at the output pin by clamping the output value to V_DD.
Table 15 EEPROM Error Signalling
Parameter
Symbol Limit Values
Unit
min.
max.
Output voltage @
EEPROM error
V_OUT
0.96 x V_DD V_DD V
Notes
Data Sheet
26
V 1.0, 2007-06