English
Language : 

TLE8104E Datasheet, PDF (25/27 Pages) Infineon Technologies AG – Smart Quad Channel Powertrain Switch
TLE8104E
Smart Quad Channel Powertrain Switch
Revision History
9
Revision History
Table 2
Version
Date
V1.3 -> V1.4: 2010-04-07
V1.4
2010-04-07
V1.2 -> V1.3: 2009-01-16
Changes
New cover graphics
Package name changed to PG-DSO-20
Figure 2: parameters naming corrected to match pin naming
Chapter 4.1: added note to absolute maximum ratings
Item 4.2.3: typ. value changed, 26.2 K/W ->26 K/W
Item 5.1.5: parameter name changed “Low input pull-up current through pin RESET” ->
“High input pull-up current through pin RESET”
Item 5.1.5: conditions changed VRESET = 0 V -> VRESET = 2 V,
Item 5.1.5: values corrected according to terms
Item 5.2.1: parameter renamed VINL -> VIN(L)
Item 5.2.2: parameter renamed VINH -> VIN(H)
Item 5.2.3: parameter renamed VINHys -> VIN(Hys)
Item 5.2.4: values corrected according to terms
Item 5.2.8: values corrected according to terms
Item 5.4.1, Item 5.4.2 and Item 5.4.4: parameter renamed to fit new test conditions
Item 5.4.2 and Item 5.4.4: test conditions adapted
Item 5.4.4: min and max value corrected
Item 5.4.5 and Item 5.4.6: parameter moved to Chapter 5.6
Item 5.4.6: parameter renamed VFAULT -> VFAULT(L)
Item 5.5.2: values corrected according to terms
Item 5.5.3: parameter renamed VSOH -> VSO(H)
Item 5.5.4: parameter renamed VSOL -> VSO(L)
Item 5.5.4: test conditions corrected according to terms
Item 5.5.5: parameter renamed fSCLK
Item 5.5.6: added “(depending on SO load)”
Item 5.5.6: parameter renamed tpSCLK
Item 5.5.7: parameter renamed tSCKH -> tSCLK(H)
Item 5.5.8: parameter renamed tSCKL -> tSCLK(L)
Value changed for tvalid (Item 5.5.15) with CL = 50 pF
Added tvalid (Item 5.5.15) with CL = 100 pF and CL = 220 pF
Item 5.5.16: parameter added
Item 5.5.17: parameter added
Item 5.5.18: parameter added
Item 5.5.19: parameter added
Chapter 5.5.3: numbering changed 5.6 -> 5.5.3
Figure 13: parameters naming corrected to match naming in upper electrical
characteristics table
Chapter 5.6: chapter added
Figure 20: Vdd changed to Vs
Chapter 7: notes added
Data Sheet
25
V1.4, 2010-04-26