HYS72D32300GBR-5-B Datasheet, PDF (25/48 Pages) Infineon Technologies AG – 184 - Pin Registered Double Data Rate SDRAM Modules

HYS72D[32/64/128]3[00/20]GBR
Registered Double Data Rate SDRAM Modules
Electrical Characteristics
8) The specific requirement is that DQS be valid (HIGH, LOW, or some point on a valid transition) on or before this CK edge.
A valid transition is defined as monotonic and meeting the input slew rate specifications of the device. When no writes were
previously in progress on the bus, DQS will be transitioning from Hi-Z to logic LOW. If a previous write was in progress,
DQS could be HIGH, LOW, or transitioning from HIGH to LOW at this time, depending on t_DQSS.
9) The maximum limit for this parameter is not a device limit. The device operates with a greater value for this parameter, but
system performance (bus turnaround) degrades accordingly.
10) Fast slew rate ≥ 1.0 V/ns , slow slew rate ≥ 0.5 V/ns and < 1 V/ns for command/address and CK & CK slew rate > 1.0 V/ns,
measured between V_OH(ac) and V_OL(ac).
11) For each of the terms, if not already an integer, round to the next highest integer. t_CK is equal to the actual system clock
cycle time.
12) A maximum of eight Autorefresh commands can be posted to any given DDR SDRAM device.
Data Sheet
25
Rev. 1.1, 2004-04
10102003-01E2-HPA8