TLE7250V_15 Datasheet, PDF (22/34 Pages) Infineon Technologies AG – High Speed CAN-Transceiver

TLE7250VLE
TLE7250VSJ
Electrical Characteristics
Table 6 Electrical characteristics (cont’d)
4.5 V < V_CC < 5.5 V; 3.0 V < V_IO < 5.5 V; R_L = 60 Ω; -40 °C < T_j < 150 °C; all voltages with respect to ground;
positive current flowing into pin; unless otherwise specified.
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Dynamic CAN-Transceiver Characteristics
Propagation delay
TxD-to-RxD “low”
(“recessive to “dominant”)
Propagation delay
TxD-to-RxD “high”
(“dominant” to “recessive”)
Propagation delay
extended load
TxD-to-RxD “low”
(“recessive to “dominant”)
Propagation delay
extended load
TxD-to-RxD “high”
(“dominant” to “recessive”)
Propagation delay
TxD “low” to bus “dominant”
t_Loop(H,L) –
t_Loop(L,H) –
t_{Loop_Ext(H} –
,L)
t_{Loop_Ext(L} –
,H)
t_d(L),T
–
Propagation delay
t_d(H),T
–
TxD “high” to bus “recessive”
Propagation delay
t_d(L),R
–
bus “dominant” to RxD “low”
Propagation delay
t_d(H),R
–
bus “recessive” to RxD “high”
Delay Times
Delay time for mode change t_Mode
–
180 255 ns
180 255 ns
–
300 ns
–
300 ns
90 140 ns
90 140 ns
90 140 ns
90 140 ns
–
20 µs
C_L = 100 pF,
4.75 V < V_CC < 5.25 V,
C_RxD = 15 pF;
C_L = 100 pF,
4.75 V < V_CC < 5.25 V,
C_RxD = 15 pF;
1) _{CL = 200 pF,}
R_L = 120 Ω, 4.75 V <
V_CC < 5.25 V,
C_RxD = 15 pF;
1) _{CL = 200 pF,}
R_L = 120 Ω, 4.75 V <
V_CC < 5.25 V,
C_RxD = 15 pF;
C_L = 100 pF,
4.75 V < V_CC < 5.25 V,
C_RxD = 15 pF;
C_L = 100 pF,
4.75 V < V_CC < 5.25 V,
C_RxD = 15 pF;
C_L = 100 pF,
4.75 V < V_CC < 5.25 V,
C_RxD = 15 pF;
C_L = 100 pF,
4.75 V < V_CC < 5.25 V,
C_RxD = 15 pF;
1) _{(see Figure 14 and}
Figure 15);
P_7.1.46
P_7.1.47
P_7.1.53
P_7.1.54
P_7.1.48
P_7.1.49
P_7.1.50
P_7.1.51
P_7.1.52
Data Sheet
22
Rev. 1.0, 2015-08-12