English
Language : 

TLE7250V_15 Datasheet, PDF (20/34 Pages) Infineon Technologies AG – High Speed CAN-Transceiver
TLE7250VLE
TLE7250VSJ
Electrical Characteristics
Table 6 Electrical characteristics (cont’d)
4.5 V < VCC < 5.5 V; 3.0 V < VIO < 5.5 V; RL = 60 Ω; -40 °C < Tj < 150 °C; all voltages with respect to ground;
positive current flowing into pin; unless otherwise specified.
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Transmission Input TxD
“High” level input voltage
threshold
“Low” level input voltage
threshold
Pull-up resistance
Input hysteresis
Input capacitance
TxD permanent “dominant”
time-out
VTxD,H
–
0.5 0.7 V
× VIO × VIO
VTxD,L 0.3 0.4 –
V
× VIO × VIO
RTxD
10 25 50 kΩ
VHYS(TxD) –
450 –
mV
CTxD
–
–
10 pF
tTxD
4.5 –
16 ms
“recessive” state;
“dominant” state;
–
1)
1)
normal-operating mode;
P_7.1.15
P_7.1.16
P_7.1.17
P_7.1.18
P_7.1.19
P_7.1.20
Not Enable Input NEN
“High” level input voltage
threshold
“Low” level input voltage
threshold
Pull-up resistance
Input capacitance
Input hysteresis
Bus Receiver
Differential receiver threshold
“dominant”
normal-operating mode
Differential receiver threshold
“recessive”
normal-operating mode
VNEN,H –
0.5 0.7 V
× VIO × VIO
VNEN,L 0.3 0.4 –
V
× VIO × VIO
RNEN
10
25
50
kΩ
CNEN
–
–
10 pF
VHYS(NEN) –
200 –
mV
VDiff_D
–
0.75 0.9 V
VDiff_R 0.5 0.66 –
V
power-save mode;
P_7.1.21
normal-operating mode; P_7.1.22
–
P_7.1.23
1)
P_7.1.24
1)
P_7.1.25
2)
P_7.1.26
2)
P_7.1.27
Common mode range
CMR -12 –
12
V
VCC = 5 V;
Differential receiver hysteresis VDiff,hys –
90 –
mV 1)
normal-operating mode
P_7.1.28
P_7.1.29
CANH, CANL input resistance Ri
10 20 30 kΩ “recessive” state;
Differential input resistance
RDiff
20 40 60 kΩ “recessive” state;
Input resistance deviation
∆Ri
-1 –
1
% 1) “recessive” state;
between CANH and CANL
Input capacitance CANH, CANL CIn
versus GND
–
20
40
pF
1) VTxD = VIO;
Differential input capacitance CIn_Diff –
10
20
pF
1) VTxD = VIO;
P_7.1.30
P_7.1.31
P_7.1.32
P_7.1.33
P_7.1.34
Data Sheet
20
Rev. 1.0, 2015-08-12