TLE7250V_15 Datasheet, PDF (21/34 Pages) Infineon Technologies AG – High Speed CAN-Transceiver

TLE7250VLE
TLE7250VSJ
Electrical Characteristics
Table 6 Electrical characteristics (cont’d)
4.5 V < V_CC < 5.5 V; 3.0 V < V_IO < 5.5 V; R_L = 60 Ω; -40 °C < T_j < 150 °C; all voltages with respect to ground;
positive current flowing into pin; unless otherwise specified.
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Bus Transmitter
CANL/CANH “recessive”
output voltage
normal-operating mode
V_CANL/H 2.0 2.5 3.0 V
V_TxD = V_IO,
no load;
P_7.1.35
CANH, CANL “recessive”
output voltage difference
normal-operating mode
V_{Diff_NM} -500 –
50
mV V_TxD = V_IO,
no load;
P_7.1.36
CANL “dominant”
output voltage
normal-operating mode
V_CANL 0.5 –
2.25 V
V_TxD = 0 V;
P_7.1.37
CANH “dominant”
output voltage
normal-operating mode
V_CANH 2.75 –
4.5 V
V_TxD = 0 V;
P_7.1.38
CANH, CANL “dominant”
output voltage difference
normal-operating mode
according to ISO 11898-2
V_Diff = V_CANH - V_CANL
CANH, CANL “dominant”
output voltage difference
normal-operating mode
V_Diff = V_CANH - V_CANL
Driver “dominant” symmetry
normal-operating mode
V_SYM = V_CANH + V_CANL
CANL short circuit current
CANH short circuit current
Leakage current, CANH
Leakage current, CANL
V_Diff
1.5 –
3.0 V
V_TxD = 0 V,
50 Ω < R_L < 65 Ω,
4.75 < V_CC < 5.25 V;
P_7.1.39
V_{Diff_R45} 1.4
–
V_SYM
4.5 5
3.0 V
5.5 V
V_TxD = 0 V,
45 Ω < R_L < 50 Ω,
4.75 < V_CC < 5.25 V;
P_7.1.40
V_CC = 5.0 V, V_TxD = 0 V; P_7.1.41
I_CANLsc 40
75
I_CANHsc -100 -75
I_CANH,lk -5
–
I_CANL,lk -5
–
100 mA V_CANLshort = 18 V,
V_CC = 5.0 V, t < t_TxD,
V_TxD = 0 V;
-40
mA V_CANHshort = 0 V,
V_CC = 5.0 V, t < t_TxD,
V_TxD = 0 V;
5
µA V_CC = V_IO = 0 V,
0 V < V_CANH < 5 V,
V_CANH = V_CANL;
5
µA V_CC = V_IO = 0 V,
0 V < V_CANL < 5 V,
V_CANH = V_CANL;
P_7.1.42
P_7.1.43
P_7.1.44
P_7.1.45
Data Sheet
21
Rev. 1.0, 2015-08-12