ICE3BR2565JF Datasheet, PDF (2/36 Pages) Infineon Technologies AG – Off-Line SMPS Current Mode Controller with integrated 650V CoolMOS and Startup cell (frequency jitter Mode) in FullPak

CoolSET^®-F3R
ICE3BR2565JF
Revision History:
2008-09-11
Previous Version:
0.2
Page
Subjects (major changes since last revision)
15
17,18
Add max. limitation for C_BK capacitance
Revise description of protection mode. Add constrains of 25.5V Vcc OVP
19
Revise max. voltage for V_FB, V_CS and V_BA
19
Revise I_{D_Puls} to T_j=125°C and add the avalanche rating
23
Add Drain Source Avalanche Breakdown Voltage
24~28
29,30
Add typical controller performance characteristics
Add typical CoolMOS^® performance characteristics
31
Add input power curve
32
Revise outline dimension
Datasheet
For questions on technology, delivery and prices please contact the Infineon Technologies Offices in Germany or
the Infineon Technologies Companies and Representatives worldwide: see our webpage at http://
www.infineon.com
CoolMOS^®, CoolSET^® are trademarks of Infineon Technologies AG.
Edition 2008-09-11
Published by
Infineon Technologies AG,
81726 Munich, Germany,
© 2008 Infineon Technologies AG.
All Rights Reserved.
Legal disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or
characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties
and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights
of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact your nearest
Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in
question, please contact your nearest Infineon Technologies Office.
Infineon Technologies Components may be used in life-support devices or systems only with the express written
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support
devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may
be endangered.