 English |
|
|
|
|
|
|
|
| TLE5012 Datasheet, PDF (17/57 Pages) Infineon Technologies AG – GMR-Based Angular Sensor for Rotor Position Sensing | |||
| |||
| ◁ |
3.2
Absolute Maximum Ratings
TLE5012
Specification
Table 2 Absolute Maximum Ratings
Parameter
Symbol
Voltage on VDD pin respect to
VDD
ground (VSS)
Voltage on any pin respect to
VIN
ground (VSS)
Junction Temperature
TJ
Magnetic Field Induction
B
Storage Temperature
TST
Min.
-0.5
Values
Typ. Max.
-
6.5
Unit Note / Test Condition
V max 40 h/Lifetime
-0.5 -
-40 -
-
-
-
-
-
-
-
-
-
-
-40 -
6.5
150
150
125
100
70
60
150
V additionally VDD + 0.5 V may
not be exceeded
°C
°C for 1000h not additive
mT max. 5 min @ tA = 25°C
mT max. 5 h @ tA = 25°C
mT max. 1000h @ tA = 85°C; not
additive
mT max. 1000h @ tA = 100°C; not
additive
°C without magnetic field
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the device.
3.3
Operating Range
The following operating conditions must not be exceeded in order to ensure correct operation of the TLE5012. All
parameters specified in the following sections refer to these operating conditions, unless otherwise noticed.
Table 3 is valid for -40°C < TJ < 150°C.
Table 3 Operating Range
Parameter
Symbol
Supply Voltage
VDD
Output Current (DATA-Pad)
IQ
Output Current (IFA / IFB-Pad) IQ
Input Voltage
VIN
Min.
4.5
-
-
-
-
-
-0.3
Values
Typ. Max.
5.0 5.5
-
-25
-
-5
-
-0.4
-
-15
-
-5
-
5.5
Unit Note / Test Condition
V
1)
mA PAD_DRV =â0xâ, sink current2)
mA PAD_DRV =â10â, sink current2)
mA PAD_DRV =â11â, sink current2)
mA PAD_DRV =â0xâ, sink current2)
mA PAD_DRV =â1xâ, sink current2)
V VDD + 0.3 V may not be
exceeded
Target Data Sheet
17
V 0.46, 2009-09
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese