English
Language : 

TLE7233G Datasheet, PDF (16/32 Pages) Infineon Technologies AG – SPI Driver for Enhanced Relay Control
◁
SPI Driver for Enhanced Relay Control
SPIDER - TLE7233G
Power Stages
6.4
Electrical Characteristics Power Stages
VDD = 3.0 V to VDDA, VDDA = 4.5V to 5.5V, Tj = -40 °C to +150 °C
All voltages with respect to ground, positive current flowing into pin (unless otherwise specified)
typical values: VDD = 5.0 V, VDDA = 5.0 V, Tj = 25 °C
Pos. Parameter
Symbol
Limit Values
Unit Conditions
Min. Typ. Max.
Power Supply
6.4.1 Digital supply voltage
VDD
3. 0 –
6.4.2 Digital supply current all channels IDD(ON) –
–
ON
6.4.3 Digital supply idle current
IDD(idle)
–
–
6.4.4 Digital supply sleep current
IDD(sleep) –
–
6.4.5 Digital power-on reset threshold VDD(PO) –
–
voltage
5.5
V
–
0.5
mA VDD = VDDA = 5 V
VRST = VCS = VDD
VSCLK = 0 V
VIN = 0 V
µA
fSCLK = 0 Hz
VRST = VCS = high
20
Tj = 25 °C 1)
20
Tj = 85 °C 1)
40
Tj = 150 °C
µA
VRST = 0 V
5
Tj = 25 °C 1)
5
Tj = 85 °C 1)
20
Tj = 150 °C
3.0
V
–
6.4.6 Analog supply voltage
VDDA
4.5
–
6.4.7 Analog supply current all channels IDDA(ON) –
–
ON
5.5
V
–
5
mA –
6.4.8 Analog supply idle current
IDDA(idle) –
–
µA
VCS = VDD
VSI = 0 V
VSCLK = 0 V
25
Tj = 25 °C 1)
Tj = 85 °C 1)
Tj = 150 °C
6.4.9 Analog supply sleep current
Idd(sleep) –
–
µA
VCS = VDD
VRST = 0 V
5
Tj = 25 °C 1)
5
Tj = 85 °C 1)
20
Tj = 150 °C
6.4.10 Analog power-on reset threshold VDDA(PO) –
–
4.5
V
–
voltage
Output Characteristics
6.4.11 On-State resistance per channel RDS(ON) –
1.0
2.0
2.2
6.4.12 Nominal load current
ID(nom)
390
415
–
Ω
IL = 250 mA
Tj = 25 °C 1)
Tj = 150 °C
mA
2)
Datasheet
16
Rev. 1.0, 2008-02-28
 ▷