1ED020I12-F Datasheet, PDF (16/22 Pages) Infineon Technologies AG – Single IGBT Driver IC

EICEDRIVER^TM
1ED020I12-F
Insulation Characteristics
5
Insulation Characteristics
5.1
DIN EN 60747-5-2 (VDE 0884 Teil 2): 2003-01. Basic Insulation
Description
Installation classification per EN 60664-1, Table 1
for rated mains voltage ≤ 150 V_RMS
for rated mains voltage ≤ 300 V_RMS
for rated mains voltage ≤ 600 V_RMS
Climatic Classification
Pollution Degree (EN 60664-1)
Minimum External Clearance
Minimum External Creepage
Minimum Comparative Tracking Index
Maximum Repetitive Insulation Voltage
Input to Output Test Voltage, Method b¹⁾
V_IORM * 1.875 = V_PR, 100% Production Test with t_m = 1 sec,
Partial Discharge < 5pC
Input to Output Test Voltage, Method a¹⁾
V_IORM * 1.6 = V_PR, Type and sample Test, t_m = 60 sec,
Partial Discharge < 5pC
Highest Allowable Overvoltage¹⁾
Maximum Surge Insulation Voltage
Insulation Resistance at T_s, V_IO = 500 V
Symbol
CLR
CPG
CTI
V_IORM
V_PR
V_PR
V_IOTM
V_IOSM
R_IO
Characteristic
I-IV
I-III
I-II
55/105/21
2
8.12
8.24
175
1420
2663
2272
6000
6000
>10⁹
Unit
mm
mm
V_PEAK
V_PEAK
V_PEAK
V_PEAK
V
Ω
1) Refer to VDE 0884 for a detailed description of Method a and Method b partial discharge test profiles.
*Note 1:Insulation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in
application. Surface mount classification is class A in accordance with CECCOO802.
*Note 2: This coupler is suitable for “basic insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured
by means of suitable protective circuits.
5.2
UL 1577
Description
Insulation Withstand Voltage / 1min
Insulation Test Voltage / 1sec
Symbol
V_ISO
V_ISO
Characteristic
3750
4500
Unit
V_rms
V_rms
5.3
Reliability
For Qualification Report please contact your local Infineon Technologies office.
Datasheet
16
Version 2.2, 2009-12-03