TLE5009-E2000 Datasheet, PDF (15/32 Pages) Infineon Technologies AG – GMR-Based Angular Sensor

3.4
Characteristics
TLE5009
Specification
3.4.1 Electrical Parameters
The indicated electrical parameters apply to the full operating range, unless otherwise specified. The typical values
correspond to a supply voltage V_DD = 3.0V - 5.5 V and 25 °C, unless individually specified. All other values
correspond to -40°C < T_J < 150°C.
Table 4 Electrical parameters
Parameter
Symbol
Min.
Supply current
I_DD
Values
Typ. Max.
7
10.5
POR level
POR hysteresis¹⁾
Power-On time
V_POR
2.4
V_PORhy
t_PON
2.65 2.97
50
30
40
Temperature reference
V_GMR
0.6
voltage
Diagnostic function
V_GMR
0
1.052 1.8
0.39
Temperature coefficient of TC_VGMR
0.4
V_GMR1)
1) Not subject to production test - verified by design/characterization
Unit
mA
V
mV
µs
V
V
%/K
Note / Test Condition
Without resistive or capacitive load
on output pins
Power-On Reset
Measured on V_GMR pin without
external circuit
Temperature proportional output
voltage; available on pin V_GMR
Diagnostic for internal errors;
available on pin V_GMR
3.4.2 Electrostatic discharge protection
Table 5 ESD protection
Parameter
Symbol Values
Unit
min.
max.
ESD voltage
V_HBM
±4.0
kV
V_SDM
±0.5
kV
1) Human Body Model (HBM) according to: ANSI/ESDA/JEDEC JS-001
2) Socketed Device Model (SDM) according to: ESDA/ANSI/ESD SP5.3.2-2008
Notes
Human Body Model¹⁾
Socketed Device Model²⁾
Data Sheet
15
Rev. 1.1, 2012-04