TLE5009-E2000 Datasheet, PDF (12/32 Pages) Infineon Technologies AG – GMR-Based Angular Sensor

3
Specification
TLE5009
Specification
3.1
Application Circuit
Figure 5 shows a typical 5V application circuit. The sensor is supplied by the same supply as the microcontroller.
The microcontroller comprises 5 A/D inputs used to read in the sensor output signals. For reasons of EMC and
output filtering, the following RC low pass arrangement is recommended.
100 nF
Figure 5
VD D
TLE5009
GN D1
GN D2
**)
SIN_ P
**)
SIN_ N
**)
C OS_ P
C OS_ N ^**)
VGMR
4 .7nF
*)
*)
*)
*)
*) 68 nF
**) 10 kΩ
Application circuit for the TLE5009
Microcontroller
CAN
e.g. Infineon
XC800 Series
CAN
Tranceiver
3.2
Absolute Maximum Ratings
5V
CAN RX
CAN TX
GND
Table 2 Absolute maximum ratings
Parameter
Symbol
Supply voltage
V_DD
Junction temperature
T_J
Magnetic field induction
B
Storage temperature
T_ST
Min.
-0.5
-40
-40
Values
Typ. Max.
6.5
150
150
⏐200⏐
⏐150⏐
150
Unit Note / Test Condition
V Max 40 h / lifetime
°C
For 1000 h not additive
mT Max. 5 min @ T_A = 25°C
Max. 5 h @ T_A = 25°C
°C Without magnetic field
Attention: Stresses above the max. values listed here may cause permanent damage to the device.
Exposure to absolute maximum rating conditions for extended periods may affect device
reliability. Maximum ratings are absolute ratings; exceeding only one of these values may
cause irreversible damage to the device.
Data Sheet
12
Rev. 1.1, 2012-04