TLE6280GP_07 Datasheet, PDF (11/25 Pages) Infineon Technologies AG – 3-Phase Bridge Driver IC

Functional range
Parameter and Conditions
at Tj = -40 … +150 °C, unless otherwise specified
Supply voltage⁵⁶⁷
Operating temperature range
Duty Cycle @ 20kHz⁶⁷⁸ Vs>8V
Max. voltage range at Ixx, ERR
Max. voltage range at MFP, DT⁹
Max. voltage range at SLx²
Max. voltage range at SHx³
Max. voltage range at GLx²
Max. voltage range at GHx³
Max. voltage range at BHx³
Max. voltage range at VDH⁴
Max. voltage difference Bxx - Sxx
Max. voltage difference Gxx - Sxx
Max. voltage range at DIDT
PWM frequency¹⁰
Min. dead time resistor
Datasheet TLE6280GP
Symbol
V_S
T_j
dc
VIxx; VERR
VMFP
VSLx
VSHx
VGLx
VGHx
VBHx
VVDH
VBxx-VSxx
VGxx-VSxx
VDIDT
FPWM
R_DT
Values
Unit
8 ... 20 V
-40 ...+150 °C
0...95 %
-0.3 ...+7 V
-0.3 ...+5 V
-7 ...+7 V
-7 ...+45 V
-7 ...+18 V
-7 ...+55 V
-0.3 ...+55 V
-4 ...+55 V
-0.3 ...+15 V
-0.3...+11 V
-7 ...+7 V
2...50 kHz
0 kΩ
5 _{operation above 20V limited by max allowed power dissipation and max. ratings}
6 _{If all 3 half-bridges are switched with fPWM and a duty cycle <10%, undervoltage shut down can occur below}
Vs=9.5V
7 _{Total gate charge of the attached Mosfet < 250nC}
8 _{If the bootstrap capacitor is charged to VBHx-VSHx=12V, the maximum duty cycle is 100% for 500 µs}
9 _{VMFP up to 7V allowed up to 500ms}
10 _{Limited only by the minimum bootstrap voltage (undervoltage logout of output stage) and the max allowed}
power dissipation
11
2007-07-19