CSP2510D Datasheet, PDF (2/9 Pages) Integrated Device Technology – 3.3V PHASE-LOCK LOOP CLOCK DRIVER ZERO DELAY BUFFER

IDTCSP2510D
3.3V PHASE-LOCK LOOP CLOCK DRIVER
PIN CONFIGURATION
AGND
VDD
Y0
Y1
Y2
GND
GND
Y3
Y4
VDD
G
FBOUT
1
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9
16
10
15
11
14
12
13
TSSOP
TOP VIEW
CLK
AVDD
VDD
Y9
Y8
GND
GND
Y7
Y6
Y5
VDD
FBIN
0°C TO 85°C TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol
Rating
Max
Unit
VDD
VI(1)
VO(1,2)
Supply Voltage Range
Input Voltage Range
Voltage range applied to any
output in the high or low state
–0.5 to +4.6
V
–0.5 to +6.5
V
–0.5 to VDD + 0.5 V
IIK
Input clamp current
–50
mA
(VI <0)
IOK
Terminal Voltage with Respect
±50
mA
(VO <0 or
to GND (inputs VIH 2.5, VIL 2.5)
VO > VDD)
IO
Continuous Output Current
±50
mA
(VO = 0 to VDD)
VDD or GND ContinuousCurrent
±100
mA
TSTG
Storage Temperature Range
– 65 to +150
°C
TJ
Junction Temperature
+150
°C
NOTES:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
2. The input and output negative-voltage ratings may be exceeded if the input and output
clamp-current ratings are observed.
3. The maximum package power dissipation is calculated using a junction temperature
of 150°C and a board trace length of 750 mils.
CAPACITANCE
Parameter
Description
CIN InputCapacitance
VI = VDD or GND
CO OutputCapacitance
VO = VDD or GND
CL
Load Capacitance
Min. Typ. Max. Unit

5  pF

6  pF
 30  pF
NOTE:
1. Unused inputs must be held HIGH or LOW to prevent them from floating.
RECOMMENDED OPERATING CONDITIONS
Symbol
Description
VDD, AVDD
Power Supply Voltage
TA
Operating Free-Air Temperature
Min.
Max.
Unit
3
3.6
V
0
+85
°C
2