English
Language : 

ICS844008I Datasheet, PDF (12/18 Pages) Integrated Device Technology – FEMTOCLOCKS™ CRYSTAL-TO-LVDS FREQUENCY SYNTHESIZER
ICS844008I-01
FEMTOCLOCKS™ CRYSTAL-TO-LVDS FREQUENCY SYNTHESIZER
POWER CONSIDERATIONS
This section provides information on power dissipation and junction temperature for the ICS844008I-01.
Equations and example calculations are also provided.
1. Power Dissipation.
The total power dissipation for the ICS844008I-01 is the sum of the core power plus the power dissipated in the load(s).
The following is the power dissipation for V = 3.3V + 5% = 3.465V, which gives worst case results.
DD
• Power (core) = V * (I + I ) = 3.465V * (275mA + 20mA) = 1022.175mW
MAX
DD_MAX
DD_MAX
DDA_MAX
2. Junction Temperature.
Junction temperature, Tj, is the temperature at the junction of the bond wire and bond pad and directly affects the reliability of the
device. The maximum recommended junction temperature for HiPerClockSTM devices is 125°C.
The equation for Tj is as follows: Tj = θJA * Pd_total + TA
Tj = Junction Temperature
θJA = Junction-to-Ambient Thermal Resistance
Pd_total = Total Device Power Dissipation (example calculation is in section 1 above)
T = Ambient Temperature
A
In order to calculate junction temperature, the appropriate junction-to-ambient thermal resistance θJA must be used. Assuming no air
flow and a multi-layer board, the appropriate value is 37°C/W per Table 7B below.
Therefore, Tj for an ambient temperature of 85°C with all outputs switching is:
85°C + 1.022W * 37°C/W = 122.8°C. This is below the limit of 125°C.
This calculation is only an example. Tj will obviously vary depending on the number of loaded outputs, supply voltage, air flow, and
the type of board (multi-layer).
TABLE 7A. THERMAL RESISTANCE θ FOR 32-LEAD TQFP, E-PAD FORCED CONVECTION
JA
θ by Velocity (Meters per Second)
JA
0
1
Multi-Layer PCB, JEDEC Standard Test Boards
32.2°C/W
26.3°C/W
2.5
24.7°C/W
TABLE 7B. THERMAL RESISTANCE θ FOR 32-LEAD VFQFN, FORCED CONVECTION
JA
θ vs. Air Flow (Meters per Second)
JA
Multi-Layer PCB, JEDEC Standard Test Boards
0
37.0°C/W
1
32.4°C/W
2.5
29.0°C/W
IDT™ / ICS™ LVDS FREQUENCY SYNTHESIZER
12
ICS844008AYI-01 REV. B NOVEMBER 21, 2008