|
ICS8S89831I Datasheet, PDF (10/21 Pages) Integrated Device Technology – Output frequency | |||
|
◁ |
ICS8S89831I Data Sheet
DIFFERENTIAL LVPECL-TO-LVPECL/ECL FANOUT BUFFER
2.5V LVPECL Input with Built-In 50⦠Termination Interface
The IN /nIN with built-in 50⦠terminations accept LVDS, LVPECL,
CML, SSTL and other differential signals. Both signals must meet the
VIN and VIH input requirements. Figures 3A to 3D show interface
examples for the IN/nIN with built-in 50⦠termination input driven by
the most common driver types. The input interfaces suggested here
are examples only. If the driver is from another vendor, use their
termination recommendation. Please consult with the vendor of the
driver component to confirm the driver termination requirements.
3.3V or 2.5V
2.5V
Zo = 50â¦
IN
Zo = 50â¦
VT
nIN
LVDS
Figure 3A. IN/nIN Input with Built-In 50â¦
Driven by an LVDS Driver
Receiver
With
Built-In
50â¦
2.5V
2.5V
LVPECL
Zo = 50â¦
Zo = 50â¦
IN
VT
nIN
R1
18â¦
Figure 3B. IN/nIN Input with Built-In 50â¦
Driven by an LVPECL Driver
Receiver
With
Built-In
50â¦
2.5V
2.5V
CML
Zo = 50â¦
Zo = 50â¦
IN
VT
nIN
Receiver
With
Built-In
50â¦
Figure 3C. IN/nIN Input with Built-In 50â¦
Driven by a CML Driver with Open Collector
2.5V
2.5V
R1
25â¦
Zo = 50â¦
IN
Zo = 50â¦
VT
nIN
SSTL R2
25â¦
Figure 3D. IN/nIN Input with Built-In 50â¦
Driven by an SSTL Driver
Receiver
With
Built-In
50â¦
ICS8S89831AKI REVISION A APRIL 26, 2010
10
©2010 Integrated Device Technology, Inc.
|
▷ |