89HPES22H16 Datasheet, PDF (10/37 Pages) Integrated Device Technology – Low-latency cut-through switch architecture

IDT 89HPES22H16 Data Sheet
Signal
V_DDAPE
V_SS
V_TTPE
Type
Name/Description
I PCI Express Analog Power. PCI Express analog power used by the PLL and bias
generator.
I Ground.
PCI Express Serial Data Transmit Termination Voltage. This pin allows the driver
termination voltage to be set, enabling the system designer to control the Common
Mode Voltage and output voltage swing of the corresponding PCI Serial Data Transmit
differential pair.
Table 7 Power and Ground Pins
10 of 37
October 3, 2011