ICS840004-01 Datasheet, PDF (9/13 Pages) Integrated Circuit Systems – FEMTOCLOCKS™ CRYSTAL-TO LVCMOS/LVTTL FREQUENCY SYNTHESIZER

Integrated
Circuit
Systems, Inc.
PRELIMINARY
ICS840004-01
FEMTOCLOCKS™ CRYSTAL-TO-
LVCMOS/LVTTL FREQUENCY SYNTHESIZER
APPLICATION INFORMATION
POWER SUPPLY FILTERING TECHNIQUES
As in any high speed analog circuitry, the power supply pins
are vulnerable to random noise. The ICS840004-01 provides
separate power supplies to isolate any high switching
noise from the outputs to the internal PLL. V_DD, V_DDA, and V_DDO
should be individually connected to the power supply
plane through vias, and bypass capacitors should be
used for each pin. To achieve optimum jitter performance,
power supply isolation is required. Figure 1 illustrates how
a 10Ω resistor along with a 10µF and a .01μF bypass
capacitor should be connected to each V_DDA.
3.3V or 2.5V
V_DD
.01μF 10Ω
V_DDA
.01μF
10μF
FIGURE 1. POWER SUPPLY FILTERING
CRYSTAL INPUT INTERFACE
The ICS840004-01 has been characterized with 18pF
parallel resonant crystals. The capacitor values shown
in Figure 2 below were determined using a 25MHz 18pF
parallel resonant crystal and were chosen to minimize
the ppm error.
X1
18pF Parallel Cry stal
XTAL_IN
C1
22p
XTAL_OUT
C2
22p
ICS84332
ICS840004-01
Figure 2. CRYSTAL INPUt INTERFACE
840004AG-01
www.icst.com/products/hiperclocks.html
9
REV. B JANUARY 3, 2006