ICS9250-08 Datasheet, PDF (5/15 Pages) Integrated Circuit Systems – Frequency Generator & Integrated Buffers for Celeron & PII/III™

Serial Configuration Command Bitmap
Byte0: Functionality and Frequency Select Register (default = 0)
Bit
Bit 7
Bit 2,
Bit 6:4
Bit 3
Bit 1
Bit 0
Description
0 - ±0.25% Spread Spectrum Modulation
1 - ±0.5% Spread Spectrum Modulation
Bit2 Bit6 Bit5 Bit4 CPU clock
PCI
0111
0110
100.3
133
33.43 (CPU/3)
44.33 (CPU/3)
0101
0100
112
37.33 (CPU/3)
103
34.3 (CPU/3)
0011
0010
66.8
33.4 (CPU/2)
83.3
41.65(CPU/2)
0001
0000
75
37.5 (CPU/2)
124
41.33 (CPU/3)
1111
1110
133
33.25 (CPU/4)
124
31.00 (CPU/4)
1101
1100
150
37.50 (CPU/4)
140
35.00 (CPU/4)
1011
1010
105
35.00 (CPU/3)
110
36.67 (CPU/3)
1001
1000
115
38.33 (CPU/3)
120
40.00 (CPU/3)
0 - Frequency is selected by hardware select, Latched Inputs
1 - Frequency is selected by Bit 2, 6:4 (above)
0 - Normal
1 - Spread Spectrum Enabled (Center Spread)
0 - Running
1- Tristate all outputs
PWD
0
Note1
0
0
0
Note 1. Default at Power-up will be for latched logic inputs to define frequency. Bits 2, 4, 5,
6 are default to 0000, and if bit 3 is written to a 1 to use Bits 2, 6:4, then these
should be defined to desired frequency at same write cycle.
Note: PWD = Power-Up Default
ICS9250-08
Third party brands and names are the property of their respective owners.
5