IC-TW3 Datasheet, PDF (4/24 Pages) IC-Haus GmbH – SENSOR SIGNAL CONDITIONER WITH TEMPERATURE COMPENSATION AND LINE DRIVER

iC-TW3 SENSOR SIGNAL CONDITIONER WITH
TEMPERATURE COMPENSATION AND LINE DRIVER
Rev B1, Page 4/24
ABSOLUTE MAXIMUM RATINGS
These ratings do not imply operating conditions; functional operation is not guaranteed. Beyond these ratings device damage may occur.
Item Symbol Parameter
No.
Conditions
Min.
Unit
Max.
G001 VDDx() Voltage at VDD, VDDA, VDDB, VDDIN referenced to GND, GNDA, GNDB, GNDIN
-0.3
6.0
V
G002 V()
Voltage applied to any other pin
referenced to GND
-0.3
VDD +
V
0.5
G003 V()
Voltage Difference VDDA, VDDB vs.
VDD
0.5
V
G004 V()
Voltage Difference VDDIN vs. VDD
0.5
V
G005 V()
Voltage Difference GNDA, GNDB vs.
GND
0.5
V
G006 V()
Voltage Difference GNDIN vs. GND
0.5
V
G007 Vd
ESD Susceptibility Of Signal Outputs: HBM, 100 pF discharged through 1.5 kΩ
AO, NAO, BO, NBO, ZO, NZO
2
kV
G008 Vd
ESD Susceptibility (remaining pins) HBM, 100 pF discharged through 1.5 kΩ
2
kV
G009 Tj
Junction Temperature
-40
150
°C
G010 Ts
Storage Temperature
-40
150
°C
THERMAL DATA
Item
No.
T01
T02
Symbol
Ta
Rthja
Parameter
Conditions
Operating Ambient Temperature Range
Thermal Resistance Chip To Ambient surface mounted to PCB according
to JEDEC 51
Unit
Min. Typ. Max.
-40
125 °C
40
K/W
All voltages are referenced to ground unless otherwise stated.
All currents into the device pins are positive; all currents out of the device pins are negative.