IC-MQF_15 Datasheet, PDF (37/38 Pages) IC-Haus GmbH – Sin/Cos INTERPOLATION IC WITH RS422 DRIVER

iC-MQF PROGRAMMABLE 12-BIT ^preliminary
Sin/Cos INTERPOLATION IC WITH RS422 DRIVER
Rev C1, Page 37/38
REVISION HISTORY
Rel. Rel. Date^∗ Chapter
A1 2013-11-08 ...
Modification
Rel. Rel. Date^∗ Chapter
B1 2014-06-16 FEATURES, THERMAL DATA
ELECTRICAL
CHARACTERISTICS
SERIAL CONFIGURATION
INTERFACE
SINE-TO-DIGITAL CONVERSION
ERROR MONITORING AND
ALARM OUTPUT
ORDERING INFORMATION
Modification
Standard operating temperature range extended to -40 to 100°C
Item 201: AAabs changed to typ. 0.13°
Items 601, 602: conditions simplified
I²C Slave Mode: text corrected, new subtitle: Intermediate error information buffer;
Table 8, END: description corrected, parameter END represents Enable Device;
Table 9 and 10, RAM Read/Write Access: correction of contents;
Table 43, SELHYS: description improved
Table 52, EPH: note supplemented
Section Driver Shutdown: description supplemented;
Table 58, EMASKO: correction of code description and notes;
Section Error Protocol replaced by new section: Error Logging and Clearing ERR;
Table 59, EMASKE, and Table 60 ERR: correction of contents;
ET version removed (replaced by standard)
Rel. Rel. Date^∗ Chapter
C1 2015-10-14 ELECTRICAL
CHARACTERISTICS
REGISTER MAP
SERIAL CONFIGURATION
INTERFACE
OUTPUT SETTINGS AND ZERO
SIGNAL
ERROR MONITORING AND
ALARM OUTPUT
DESIGN REVIEW: Notes On Chip
Functions
Modification
Item 514: Adaption of max. limit for condition MTD 0x02
Footnote edited for mandatory programming
Tab. 8, END: Note edited
Tab. 42, CFGZPOS: Example supplemented Tab. 43, ENZFF: Note edited
Tab. 56, EMASKO: Note edited
Tab. 57, EMASKE: Note edited
Update of contents
Page
Page
1, 5
7
16
27
31
37
Page
8
14
16
28
31
37
iC-Haus expressly reserves the right to change its products and/or specifications. An info letter gives details as to any amendments and additions made to the
relevant current specifications on our internet website www.ichaus.com/infoletter; this letter is generated automatically and shall be sent to registered users by
email.
Copying – even as an excerpt – is only permitted with iC-Haus’ approval in writing and precise reference to source.
iC-Haus does not warrant the accuracy, completeness or timeliness of the specification and does not assume liability for any errors or omissions in these
materials.
The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness
for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no
guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of
the product.
iC-Haus products are not designed for and must not be used in connection with any applications where the failure of such products would reasonably be expected
to result in significant personal injury or death (Safety-Critical Applications) without iC-Haus’ specific written consent. Safety-Critical Applications include, without
limitation, life support devices and systems. iC-Haus products are not designed nor intended for use in military or aerospace applications or environments or in
automotive applications unless specifically designated for such use by iC-Haus.
iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade
mark rights of a third party resulting from processing or handling of the product and/or any other use of the product.
∗ _{Release Date format: YYYY-MM-DD}