HMP31GP7AFR4C-Y5 Datasheet, PDF (7/18 Pages) Hynix Semiconductor – 240pin Registered DDR2 SDRAM DIMMs based on 2Gb version A

1240pin Registered DDR2 SDRAM DIMMs
ABSOLUTE MAXIMUM DC RATINGS
Parameter
Voltage on V_DD pin relative to Vss
Voltage on V_DDQ pin relative to Vss
Voltage on V_DDL pin relative to Vss
Voltage on any pin relative to Vss
Symbol
V_DD
V_DDQ
V_DDL
V_IN, V_OUT
Value
- 1.0 ~ 2.3
- 0.5 ~ 2.3
- 0.5 ~ 2.3
- 0.5 ~ 2.3
Unit
Note
V
1
V
1
V
1
V
1
Operating Conditions and Environmental Parameters
Parameter
DIMM Operating temperature(ambient)
Storage Temperature
Storage Humidity(without condensation)
DIMM Barometric Pressure(operating & storage)
DRAM Component Case Temperature Range
Symbol
T_OPR
T_STG
H_STG
P^BAR
T_CASE
Rating
0 ~ +55
-50 ~ +100
5 to 95
105 to 69
0 ~+95
Units
o_C
Notes
o_C
1
%
1
K Pascal 2
o_C
3
Note:
1. Stress greater than those listed may cause permanent damage to the device. This is a stress rating only, and device
functional operation at or above the conditions indicated is not implied. Exposure to absolute maximum rating con
ditions for extended periods may affect reliability.
2. Up to 9850 ft.
3. If the DRAM case temperature is Above 85^oC, the Auto-Refresh command interval has to be reduced to
tREFI=3.9us. For Measurement conditions of T_CASE, please refer to the JEDEC document JESD51-2.
DC OPERATING CONDITIONS (SSTL_1.8)
Symbol
Parameter
VDD
VDDL
VDDQ
VREF
VTT
VDDSPD
Supply Voltage
Supply Voltage for DLL
Supply Voltage for Output
Input Reference Voltage
Termination Voltage
EEPROM Supply Voltage
Min.
1.7
1.7
1.7
0.49*VDDQ
VREF-0.04
1.7
Rating
Typ.
1.8
1.8
1.8
0.50*VDDQ
VREF
-
Max.
1.9
1.9
1.9
0.51*VDDQ
VREF+0.04
3.6
Units
V
V
V
mV
V
V
Notes
1
1,2
1,2
3,4
5
Note:
1. Min. Type. and Max. values increase by 100mV for C3(DDR2-533 3-3-3) speed option.
2. VDDQ tracks with VDD,VDDL tracks with VDD. AC parameters are measured with VDD,VDDQ and VDD.
3. The value of VREF may be selected by the user to provide optimum noise margin in the system. Typically the value of VREF is
expected to be about 0.5 x VDDQ of the transmitting device and VREF is expected to track variations in VDDQ.
4. Peak to peak ac noise on VREF may not exceed +/-2% VREF (dc).
5. VTT of transmitting device must track VREF of receiving device.
Rev. 0.1 / Jan. 2009
7