HY5DV281622DT Datasheet, PDF (17/31 Pages) Hynix Semiconductor – 128M(8Mx16) GDDR SDRAM

HY5DV281622DT
MODE REGISTER SET (MRS)
The mode register is used to store the various operating modes such as /CAS latency, addressing mode, burst length,
burst type, test mode, DLL reset. The mode register is program via MRS command. This command is issued by the low
signals of /RAS, /CAS, /CS, /WE and BA0. This command can be issued only when all banks are in idle state and CKE
must be high at least one cycle before the Mode Register Set Command can be issued. Two cycles are required to write
the data in mode register. During the the MRS cycle, any command cannot be issued. Once mode register field is
determined, the information will be held until resetted by another MRS command.
Rev. 0.5 / Aug. 2003
17