HFCT-5905E Datasheet, PDF (8/12 Pages) Agilent(Hewlett-Packard) – Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver

Receiver Section
(Ambient Operating Temperature V_CC = 3.1 V to 3.5 V)
Parameter
Symbol Minimum Typical Maximum Units
Notes
Supply Current
Power Dissipation
Receiver Sensitivity at Eye Center
Receiver Sensitivity at Window Edge
Maximum Input Optical Power
Operating Wavelength
Data Output Voltage - Low
Data Output Voltage - High
Signal Detect Output Voltage - Low
Signal Detect Output Voltage - High
Signal Detect - Asserted
Signal Detect - Deasserted
Signal Detect - Hysteresis
Signal Detect Assert time
(off to on)
Signal Detect Deassert time
(on to off)
Power Supply Noise Rejection
I_CC
P_DISS
P_{IN Min.} (C)
P_{IN Min.} (W)
P_{IN Max.}
-8.0
l
1261
V_OL - V_CC -1.840
V_OH - V_CC -1.045
V_OL - V_CC -1.840
V_OH - V_CC -1.045
P_A
P_D + 1.5 dB
P_D
-45
P_A - P_D
0.5
AS_Max 0
75
0.263
ANS_Max 0
PSNR
100
0.35
-31.8
-31
1360
-1.620
-0.880
-1.620
-0.880
-34
4.0
100
350
50
mA
7
W
8
dBm avg. 9
dBm avg. 9
dBm avg. 9
nm
V
10
V
10
V
10
V
10
dBm avg.
dBm avg.
dB
µs
µs
mV p-p 11
Notes:
7. This does not include the output load current.
8. This does not include the output load power.
9. Minimum sensitivity and saturation levels for a 2²³-1 PRBS with 72 ones and 72 zeros inserted. (CCITT recommendation G.958)
10. These outputs are compatible with 10 K, 10 KH and 100 K ECL and PECL outputs.
11. Between 20 Hz and 2000 KHz with the recommended power supply filter. No degradation above the maximum ‘receiver sensitivity at eye
center’specification of –31.8 dBm.
8