HFCT-5905E Datasheet, PDF (1/12 Pages) Agilent(Hewlett-Packard) – Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver

Agilent HFCT-5905E MT-RJ Duplex
Single Mode Transceiver
Data Sheet
Description
The HFCT-5905E transceiver is a
high performance, cost effective
module for serial optical data
communications applications
specified for a signal rate of
155 MBd. It is designed to provide
a SONET/SDH compliant link for
155 Mb/s intermediate reach links.
The HFCT-5905 does not include a
nose shield and is not
recommended due to the potential
degradation of EMI performance in
a complete system. The HFCT-5905
is available on the rare occasion
that a system mechanical design
may not allow for a nose shield.
This module is designed for single
mode fiber and operates at a
nominal wavelength of 1300 nm.
It incorporates Agilent’s high
performance, reliable, long
wavelength optical devices and
proven circuit technology to give
long life and consistent service.
The transmitter section uses an
advanced SMQW Fabry Perot
laser with full IEC 825 and CDRH
Class I eye safety.
The receiver section uses a
MOVPE grown planar PIN
photodetector for low dark
current and excellent
responsivity.
A pseudo-ECL logic interface
simplifies interface to external
circuitry.
Features
• MT-RJ duplex single mode
transceiver
• Intermediate SONET OC3 SDH
STM1 (S1.1) compliant
• Single +3.3 V power supply
• Multisourced 2 x 5 pin
configuration
• Interchangeable with LED
multisourced 2 x 5 transceivers
• Unconditionally eye safe
laser IEC 825/CDRH Class 1
compliant
• Temperature range:
0°C to +70°C
Applications
• SONET/SDH equipment
interconnect
• ATM 155 Mb/s links