HFCT-5905E Datasheet, PDF (7/12 Pages) Agilent(Hewlett-Packard) – Agilent HFCT-5905E MT-RJ Duplex Single Mode Transceiver

Performance Specifications
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause catastrophic damage to the device. Limits apply to each parameter
in isolation, all other parameters having values within the recommended operating conditions. It should not be assumed that
limiting values of more than one parameter can be applied to the product at the same time. Exposure to the absolute maximum
ratings for extended periods can adversely affect device reliability.
Parameter
Storage Temperature
Lead Soldering Temperature/Time
Output Current
Data Input Voltage
Power Supply Voltage
Symbol Minimum
T_S
-40
T_SOLD /t_SOLD
I_O
0
V_I
GND
V_CC
0
Typical
Maximum
+85
+260/10
30
V_CC
3.6
Units
°C
°C/s
mA
V
V
Notes
Operating Environment
Parameter
Ambient Operating Temperature
Power Supply Voltage
Data Input Voltage - Low
Data Input Voltage - High
Data and Signal Detect Output Load
Symbol
T_A
V_CC
V_IL - V_CC
V_IH - V_CC
R_L
Minimum
0
3.1
-1.810
-1.165
Typical
50
Maximum
+70
3.5
-1.475
-0.880
Units
°C
V
V
V
W
Notes
1
2
Transmitter Section
(Ambient Operating Temperature V_CC = 3.1 V to 3.5 V)
Parameter
Symbol Minimum Typical Maximum Units
Supply Current
I_CC
50
120
mA
Power Dissipation
P_DISS
0.175
0.42
W
Optical Output Power
Center Wavelength
Spectral Width
P_O
-15
l_C
1261
Dl
-8
dBm avg.
1360
nm
7.7
nm
Extinction Ratio
E_R
8.2
dB
Output Optical Eye
Compliant with Eye Mask Bellcore TR-NWT-000253 and
ITU recommendation G.957
Optical Rise Time
Optical Fall Time
Data Input Current - Low
Data Input Current - High
Data Input Voltage - Low
Data Input Voltage - High
t_R
t_F
I_IL
I_IH
V_IL - V_CC
V_IH - V_CC
-200
-1.810
-1.165
2
ns
2
ns
µA
200
µA
-1.475
V
-0.880
V
Notes
3
4
5
5
6
6
Notes:
1. 2 ms^-1 air flow required.
2. Outputs terminated with 50 W to V_CC – 2V are the Thevenin equivalent.
3. The power supply current varies with temperature. Maximum current is specified at V_CC = Maximum @ maximum temperature (not including
terminations) and end of life.
4. Output power is power coupled into a single mode fiber.
5. 10% - 90% Values
6. These inputs are compatible with 10 K, 10 KH, and 100 K ECL and LVPECL inputs.
7