HFBR-59L1AL Datasheet, PDF (8/16 Pages) Agilent(Hewlett-Packard) – Agilent HFBR-59L1AL 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver

Absolute Maximum Ratings
Parameter
Symbol
Minimum Typical
Maximum
Unit Notes
Storage Temperature
T_S
-40
Case Temperature
T_C
-10
Relative Humidity
RH
5
+100
°C
1
+85
°C
1, 2
95
%
1
Supply Voltage
VCCT, R
-0.5
Data/Control Input Voltage
VI
-0.5
Sense Output Current
ID
Signal Detect [SD]
4
VCC + 0.3
5.0
V
1, 2
V
1
mA
1
Notes:
1. Absolute Maximum Ratings are those values beyond which damage to the device may occur if these limits are exceeded for other than a short period
of time. See Reliability Data Sheets for specific reliability performance.
2. Between Absolute Maximum Ratings and the Recommended Operating Conditions, functional performance is not intended, device reliability is not
implied, and damage to the device may occur over an extended period of time.
Recommended Operating Conditions
Parameter
Case Temperature
Module Supply Voltage
Data Rate:
Fibre Channel
Ethernet
Symbol
T_C
V_CCT, R
Minimum
-10
2.97
Typical
+25
3.3
1.0625
1.25
Maximum
+85
3.63
Unit Notes
°C
1
V
1
Gb/s
1
Gb/s
1
Note:
1. Recommended operating conditions are those values outside of which functional performance is not intended, device reliability is not implied, and
damage to the device may occur over an extended period of time. See Reliability Data Sheet for specific reliability performance.
Process Compatibility
Parameter
Hand Lead Solder:
Temperature
Time
Wave Solder and
Aqueous Wash:
Temperature
Time
Symbol
T_solder
ttime
Tsolder
ttime
Minimum
Typical
Maximum
+260
10
+260
10
Unit Notes
°C
sec
°C
1
sec
Note:
1. Aqueous wash pressure < 110 psi.
7