HFBR-59L1AL Datasheet, PDF (2/16 Pages) Agilent(Hewlett-Packard) – Agilent HFBR-59L1AL 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver

Agilent HFBR-59L1AL 1.25 GBd Ethernet
and 1.0625 GBd Fibre Channel 850 nm
SFF Low Voltage (3.3 V) Optical
Transceiver
Data Sheet
Description
The HFBR-59L1AL from Agilent
Technologies is a high
performance, cost-effective
optical transceiver for serial
optical data communications
applications operating at
1.25 Gb/s and 1.0625 Gb/s. This
module is designed for
multimode fiber and operates at
a nominal wavelength of 850 nm.
The transceiver incorporates
3.3 V DC compatible technology
including an 850 nm VCSEL
transmitter. The HFBR-59L1AL
offers maximum flexibility to
Fibre Channel and Ethernet
designers, manufacturers, and
system integrators. It is
designed for use in short reach
multimode fiber optic
1000BASE-SX and Fiber
Channel (100-M5-SN-1) links.
This device is also designed for a
wide voltage and temperature
range of operation.
This transceiver is compliant
with the Small Form Factor
Multi-Source Agreement and is
fully compliant with all
equipment meeting the Gigabit
Ethernet (1000 Base-SX) and
Fibre Channel (FC-PI 100-M5-
SN-I, FC-PI 100-M6-SN-I, FC-PH2
100-M5-SN and FC-PH2 100-M6-
SN-I 1.0625 GBd) specifications.
Related Products
• HFCT-59L1ATL: 1300 nm Small
Form Factor optical transceiver
for 10 km Gigabit Ethernet links
• HFBR-5911L/AL: 850 nm Small
Form Factor optical transceiver
for short reach Gigabit Ethernet
(1000BASE-SX) links
• HFBR-5701L/LP: 850 nm Small
Form Factor Pluggable optical
transceiver for short reach
Gigabit Ethernet (1000BASE-SX)
and 1.0625 Gbd Fibre Channel
links
• HDMP-2634: Single SerDes IC
2.5/1.25 Gigabit
• HDMP-1687: Quad SerDes IC for
Gigabit Ethernet with 10 bit
parallel interface and TTL clock
input
• HDMP-1685A: Quad SerDes IC for
Gigabit Ethernet with 5 bit
parallel interface and DDR TTL
clock input
• HDMP-1636A/46A: Single SerDes
IC for Gigabit Ethernet and Fiber
Channel
• HDMP-1637A: Single SerDes IC
with PECL RefClk
• HDMP-1638: Single SerDes IC
with PECL RefClk and Dual Serial
I/O
Features
• Data rate specification:
1.25 GBd operation for IEEE 802.3
Gigabit Ethernet 1000BASE-SX
1.0625 GBd operation for FC-PI
100-M5-SN-I and FC-PI 100-M6-
SN-I
• Wide temperature and supply
voltage operation
• Industry standard 2 x 5 SFF
package
• LC-duplex connector optical
interface
• Link lengths at 1.25 GBd:
0.5 to 500 m – 50/125 mm MMF
0.5 to 275 m – 62.5/125 mm MMF
• Link lengths at 1.0625 GBd:
0.5 to 500 m – 50/125 mm MMF
0.5 to 300 m – 62.5/125 mm MMF
• Reliable 850 nm Vertical Cavity
Surface Emitting Laser (VCSEL)
source technology
• Laser AEL Class I (eye safe) per:
US 21 CFR (J)
EN 60825-1 (+All)
• Single +3.3 V power supply
operation
• Wave solder and aqueous wash
process compatible
Applications
• Short reach Gigabit Ethernet links
• High speed backplane
interconnects
• Switched backbones
• iSCSI applications
• Mass storage system I/O
• Computer system I/O
• High speed peripheral interface
• High speed switching systems
• Host adaptor I/O