HFBR-59L1AL Datasheet, PDF (5/16 Pages) Agilent(Hewlett-Packard) – Agilent HFBR-59L1AL 1.25 GBd Ethernet and 1.0625 GBd Fibre Channel 850 nm SFF Low Voltage (3.3 V) Optical Transceiver

These transceivers provide
superior EMI performance. This
greatly assists the designer in
the management of the overall
system EMI performance.
Eye Safety
These 850 nm VCSEL-based
transceivers provide Class 1 eye
safety by design. Agilent has
tested the transceiver design for
compliance with the
requirements listed in Table 1:
Regulatory Compliance, under
normal operating conditions and
under a single fault condition.
Flammability
The HFBR-59L1AL VCSEL
transceiver housing is made of
metal and high strength, heat
resistant, chemically resistant,
and UL 94V-0 flame retardant
plastic.
Caution
There are no user serviceable
parts nor is any maintenance
required for the HFBR-59L1AL.
All adjustments are made at the
factory before shipment to our
customers.
Tampering with or modifying the
performance of the HFBR-
59L1AL will result in voided
product warranty. It may also
result in improper operation of
the HFBR-59L1AL circuitry, and
possible overstress of the laser
source. Device degradation or
product failure may result.
Connection of the HFBR-59L1AL
to a non-approved optical
source, operating above the
recommended absolute
maximum conditions or
operating the HFBR-59L1AL in a
manner inconsistent with its
design and function may result
in hazardous radiation exposure
and may be considered an act of
modifying or manufacturing a
laser product.
The person(s) performing such
an act is required by law to
recertify and reidentify the laser
product under the provisions of
U.S. 21 CFR (Subchapter J) and
the TUV.
Ordering Information
Please contact your local field
sales engineer or one of Agilent
Technologies franchised
distributors for ordering
information. For technical
information regarding this
product, including the MSA,
please visit Agilent Technologies
Semiconductors Products
Website at www.agilent.com/
view/fiber. Use the quick search
feature to search for this part
number. You may also contact
Agilent Technologies
Semiconductor Products
Customer Response Center at
1-800-235-0312.
Table 1. Regulatory Compliance
Feature
Electrostatic Discharge (ESD) to the
Electrical Pins
Electrostatic Discharge (ESD) to the
Duplex LC Receptacle
Test Method
MIL-STD-883C
Method 3015.4
Variation of IEC 61000-4-2
Electromagnetic Interference (EMI)
Immunity
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class 1
Variation of IEC 61000-4-3
Eye Safety
Component Recognition
US FDA CDRH AEL Class 1
En(IEC)60825-1, 2
EN60950 Class 1
Underwriters Laboratories and Canadian
Standards Association Joint Component
Recognition for Information Technology
Equipment including Electrical Business
Equipment.
Performance
Class 2 (>2000 V)
Typically withstand at least 25 kV without damage when the
duplex LC connector receptacle is contaced by a Human
Body Model probe.
System margins are dependent on customer board and
chassis design.
Typically shows a negligible effect from a 10 V/m field
swept from 80 to 1000 MHz applied to the transceiver
without a chassis enclosure.
CDRH file # 9720151
TUV file # R2079009
UL file # E173874
4