English
Language : 

HDMP-1526 Datasheet, PDF (8/14 Pages) Agilent(Hewlett-Packard) – Fibre Channel Transceiver Chip
HDMP-1526 (Transmitter Section)
Output Jitter Characteristics
TC = 0°C to +85°C, VCC = 4.5 V to 5.25 V
Symbol
Parameter
RJ[1] Random Jitter at DOUT, the High Speed Electrical Data Port, specified as
1 sigma deviation of the 50% crossing point
DJ[1] Deterministic Jitter at DOUT, the High Speed Electrical Data Port
Units Typ.
ps
8
ps
35
Note:
1. Defined by Fibre Channel Specification Rev 4.1, Annex A, Section A.4 and tested using measurement method shown in Figure 8.
HP70841B
PATTERN
GENERATOR*
0000011111
+ DATA
- DATA
106.25 MHz
1.0625 GHz
HP83480A
OSCILLOSCOPE
TRIGGER
CH1 CH2
HP70311A
CLOCK SOURCE
* PATTERN
GENERATOR
PROVIDES A
DIVIDE BY
10 FUNCTION.
BIAS
TEE
+DOUT -DOUT
HDMP-1526
REFCLK LOOPEN
Tx[0..9]
1.4 V
0011111000
(STATIC K28.7)
HP70311A
CLOCK SOURCE
1.0625 GHz
DIVIDE
BY 10
CIRCUIT
(DUAL
OUTPUT)
DIVIDE
BY 2
CIRCUIT
HP70841B
PATTERN
GENERATOR*
+K28.5, -K28.5
+ DATA
- DATA
HP83480A
OSCILLOSCOPE
TRIGGER
CH1 CH2
VARIABLE
DELAY
106.25 MHz
+DOUT -DOUT
-DIN
+DIN
HDMP-1526
REFCLK
ENBYTSYNC
LOOPEN
Tx[0..9] Rx[0..9]
a. Block Diagram of RJ Measurement Method.
b. Block Diagram of DJ Measurement Method.
Figure 8. Transmitter Jitter Measurement Method.
HDMP-1526 (TRx)
Thermal and Power Temperature Characteristics,
TC = 0°C to +85°C, VCC = 4.5 V to 5.25 V
Symbol
Parameter
PD,TRx[1,2]
Transceiver Power Dissipation, Outputs Open, Parallel Data
has 5 Ones and 5 Zeroes
PD,TRx[1,2,3] Transceiver Power Dissipation, Outputs Connected per
Recommended Bias Terminations
Θjc[4]
Thermal Resistance, Junction to Case
Units
Watt
Watt
°C/Watt
Typ. Max.
1.6
1.8 2.4
7
Notes:
1. PD is calculated by multiplying the max VCC by the max ICC and subtracting the power dissipated outside the chip at the high speed
bias resistors.
2. Typical specified with VCC = 5 volts, maximum specified with VCC = 5.25 volts.
3. Specified with high speed outputs biased with 270 Ω resistors and receiver TTL outputs driving 10 pF loads. Pattern is PRBS 27-1.
4. Based on independant package testing by HP.
689