English
Language : 

HCPL-540X Datasheet, PDF (5/12 Pages) Agilent(Hewlett-Packard) – Hermetically Sealed, Very High Speed, Logic Gate Optocouplers
◁
Absolute Maximum Ratings
(No derating required up to +125°C)
Storage Temperature Range, TS .................................. -65°C to +150°C
Operating Temperature, TA ......................................... -55°C to +125°C
Case Temperature, TC ................................................................ +170°C
Junction Temperature, TJ .......................................................... +175°C
Lead Solder Temperature .............................................. 260°C for 10 s
Average Forward Current, IF AVG (each channel) ........................ 10 mA
Peak Input Current, IF PK (each channel) ............................... 20 mA[1]
Reverse Input Voltage, VR (each channel) ....................................... 3 V
Supply Voltage, VCC ............................................. 0.0 V min., 7.0 V max.
Average Output Current, IO ............................ -25 mA min., 25 mA max.
(each channel)
Output Voltage, VO (each channel) ..................... -0.5 V min., 10 V max.
Output Power Dissipation, PO (each channel) ........................... 130 mW
Package Power Dissipation, PD (each channel) ......................... 200 mW
Single Channel Product Only
Three State Enable Voltage, VE ........................... -0.5 V min., 10 V max.
8 Pin Ceramic DIP Single Channel Schematic
ANODE
VE
VO
CATHODE
Note enable pin 7. An external 0.01 µF to 0.1 µF bypass capacitor must be connected
between VCC and ground for each package type.
ESD Classification
(MIL-STD-883, Method 3015)
HCPL-5400/01 .................................................................. (∆∆ ), Class 2
HCPL-5430/31 and HCPL-6430/31 ................................. (Dot), Class 3
Recommended Operating Conditions
Parameter
Symbol Min.
Input Current (High)
Supply Voltage, Output
Input Voltage (Low)
Fan Out (Each Channel)
IF(ON)
VCC
VF(OFF)
N
6
4.75
–
–
Max.
10
5.25
0.7
5
Units
mA
V
V
TTL Loads
Single Channel Product Only
High Level Enable Voltage
VEH
2.0
VCC
V
Low Level Enable Voltage
VEL
0
0.8
V
1-528
 ▷