HMC757LP4E Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC WATT POWER AMPLIFIER, 16 - 24 GHz

v00.0610
Evaluation PCB
HMC757LP4E
GaAs pHEMT MMIC ½ WATT
POWER AMPLIFIER, 16 - 24 GHz
9
List of Materials for Evaluation PCB 131216 ^[1]
Item
Description
J1, J2
2.9 mm Connectors
J3, J4
DC Pins
C1, C16
100 pF Capacitor, 0402 Pkg.
C5, C17
10 kpF Capacitor, 0402 Pkg.
C9, C18
4.7 µF Capacitor, 0402 Pkg.
U1
PCB ^[2]
HMC757LP4E Power Amplifier
125559 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon FR4
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
9-8