HMC566LP4E_10 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 28 - 36 GHz

v02.0609
Evaluation PCB
HMC566LP4E
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
7
List of Materials for Evaluation PCB 122782 ^[1]
Item
Description
J1 - J5
DC Pin
J6 - J7
PCB Mount K Connector
C1 - C4
100 pF Capacitor, 0402 Pkg.
C5 - C8
10 nF Capacitor, 0603 Pkg.
C9 - C12
4.7 µF Capacitor, Tantalum
U1
PCB ^[2]
HMC566LP4E
122780 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-6