HMC566LP4E_10 Datasheet, PDF (4/6 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 28 - 36 GHz

v02.0609
Typical Supply Current vs. Vdd
Vdd (V)
Idd (mA)
+2.5
79
+3.0
82
+3.5
85
Note: Amplifier will operate over full voltage ranges shown
above.
HMC566LP4E
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
7
Pin Descriptions
Pin Number
Function
1, 2, 4 - 7, 12 - 15,
17 - 19, 24
GND
3
RFIN
8 - 11
N/C
16
RFOUT
Description
This pins and exposed ground paddle
must be connected to RF/DC ground.
This pin is AC coupled
and matched to 50 Ohms.
No Connection
This pin is AC coupled
and matched to 50 Ohms.
Interface Schematic
23, 22, 21, 20
Vdd1, 2, 3, 4
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 10 nF and 4.7 µF are required.
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-4