HMC566LP4E_10 Datasheet, PDF (5/6 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 28 - 36 GHz

7
Outline Drawing
v02.0609
HMC566LP4E
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, 28 - 36 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC566LP4E
RoHS-compliant Low Stress Injection Molded Plastic
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Lead Finish
100% matte Sn ^[2]
Package Marking ^[1]
H566
XXXX
7-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]