HMC464LP5 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC POWER AMPLIFIER, 2.0 - 20.0 GHz

v00.0304
MICROWAVE CORPORATION
HMC464LP5
GaAs PHEMT MMIC
POWER AMPLIFIER, 2.0 - 20.0 GHz
Evaluation PCB
8
List of Materials for Evaluation PCB 108344*
Item
J1, J2
J3, J4
C1, C2
C3, C4
C5, C6
U1
Description
PC Mount SMA Connector
2 mm Molex Header
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
4.7 µF Capacitor, Tantalum
HMC464LP5
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown. A sufficient number of
VIA holes should be used to connect the top and bottom
ground planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB**
108342 Evaluation PCB
** Circuit Board Material: Rogers 4350
* Reference this number when ordering complete evaluation PCB.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
8 - 273