HMC686LP4 Datasheet, PDF (15/18 Pages) Hittite Microwave Corporation – BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz

v05.0509
HMC686LP4 / 686LP4E
BiCMOS MIXER W/ INTEGRATED
LO AMPLIFIER, 700 - 1500 MHz
Evaluation PCB - 0.7 - 1.1 GHz RF Band, Narrowband High IP3 Upconverter Tune
10
10 - 15
List of Materials for Evaluation PCB 122410 ^[1]
Item
J1 - J3
J4 - J7
C1, C19
C2
C7, C8
C10, C12, C16, C18
C11, C15, C17, C21
C20
Description
SMA Connector
DC Pin
22 pF Capacitor, 0402 Pkg.
4.7 pF Capacitor, 0402 Pkg.
10 nF Capacitor, 0402 Pkg.
1 nF Capacitor, 0402 Pkg.
0.1 µF Capacitor, 0603 Pkg.
4.7 µF Case A, Tantalum
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
R1
0 Ohm Resistor, 0402 Pkg.
R2 - R4
0 Ohm Resistor, 0402 Pkg.
R5
68 Ohm Resistor, 0402 Pkg.
R9
330 Ohm Resistor, 0603 Pkg.
T1
1:1 Transformer - Tyco MABACT0039
U1
HMC686LP4(E) Downconverter
L1
5.6 nH Ind, 0402 Pkg.
PCB ^[2]
118162 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25R, FR4
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]