HD404054 Datasheet, PDF(80/101 Page) Hitachi Semiconductor – HMCS400-series microcomputers designed to increase program productivity with large-capacity memory

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

HD404054 Datasheet, PDF (80/101 Pages) Hitachi Semiconductor – HMCS400-series microcomputers designed to increase program productivity with large-capacity memory

◁

HD404054 Series/HD404094 Series

Programming the Built-In PROM

The MCUâs built-in PROM is programmed in PROM mode. PROM mode is set by pulling TEST, M0, and

M1 low, and RESET low as shown in figure 63. In PROM mode, the MCU does not operate, but it can be

programmed in the same way as any other commercial 27256-type EPROM using a standard PROM

programmer and an 42-to-28-pin socket adapter. Recommended PROM programmers and socket adapters

of the HD4074054 and HD4074094 are listed in table 27.

Since an HMCS400-series instruction is ten bits long, the HMCS400-series MCU has a built-in conversion

circuit to enable the use of a general-purpose PROM programmer. This circuit splits each instruction into

five lower bits and five upper bits that are read from or written to consecutive addresses. This means that

if, for example, 4-kwords of built-in PROM are to be programmed by a general-purpose PROM

programmer, a 8-kbyte address space ($0000â$7FFF) must be specified.

VCC

VPP

VCC

RESET

TEST

VPP

OSC1

VCC

HD4074054

HD4074094

O0 to O7

A0 to A14

Data

O0 to O7

Address

A0 to A14

GND

Figure 63 PROM Mode Connections

Table 27 Recommended PROM Programmers and Socket Adapters

PROM Programmer

Manufacturer

Model Name

DATA I/O Corp.

121B

AVAL Corp.

PKW-1000

Socket Adapter

Package

DP-42S

FP-44A

Model Name

HS4654ESS01H

HS4654ESH01H

Manufacturer

Hitachi

▷