HR30-6PA-6SC_1 Datasheet, PDF (9/12 Pages) Hirose Electric – Miniature Waterproof Plastic Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sApplicable Tools
Type
Manual
Automatic
Description
Manual crimping tool
Automatic crimping machine
Applicator
Part Number
HT-102/HR30-1
CM-105
AP105-HR30-1
Extraction tool
HR30-TP
CL No.
150-0229-6
901-0005-4
901-2015-9
150-0219-2
Applicable contact
HR30-SC-111
HR30-PC-111
----------
HR30-SC-211
HR30-PC-211
HR30-SC-111
HR30-SC-211
HR30-PC-111
HR30-PC-211
Applicable wire
AWG#26~#30
----------
AWG#26~#30
----------
----------
Manual contact crimping tool HT-102/HR30-1 Automatic contact crimping machine CM-105
Contact extraction tool HR30-TP
BReceptacle, Board Mounting Through Hole Pattern
0.9 0.9 _6-Ø0.65
0.9 0.9 _6-Ø0.65
2.16
2.16
1.44
1.44
12-Ø0.65
2.16
2.16
1.44
1.44 _12-Ø0.65
1
2
3
6
5
4
5
1
6
4
2
3
3
7
10
12
1
4
8
11
1
4
8
11
3
7
10
12
0.9
0.9
1.8 1.8
6R-6PD
1.52 1.52
6R-6SD
0.72
0.72
7R-12PD
0.72
0.72
8R-12SD
Notes 1.The receptacle through hole configuration depicts a view from the mating side of the connector.
2.The recommended board maximum thickness :1.2 mm.
3.Tolerance of +0.03 mm is recommended for the plated through hole location.
Tolerance of +0.02 mm is recommended for the plated through hole diameter.
BContact Position Arrangement
BPanel Cutout
Alignment mark
Alignment mark
A +0.05
0
1
3
2
HR30-6P-3S(71)
16
2
5
34
HR30-6P-6S(71)
51
462
3
HR30-6P-6P(71)
321
7654
10 9 8
321
7654
10 9 8
12 11
123
4567
8 9 10
11 12
HR30-7P-10SC(71) HR30-7P-12SC(71) HR30-8P-12PC(71)
A
B
3,6 pos 1.25 6.45
10,12 pos 1.35 9.25
Notes 1.The contact configuration depicts a view from the wiring side.
2. Mounting to the panel is accomplished by tightening the hexagonal nut from the rear side of the panel.
C
8.05
11.05
ØC _0+0.05
D Panel Thishness
3.95 0.7~2
5.45 0.7~3
9