HR30-6PA-6SC_1 Datasheet, PDF (2/12 Pages) Hirose Electric – Miniature Waterproof Plastic Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sProduct Specifications
Ratings
Current rating
Voltage rating
5A (3 pos.)
2A (6,10,12 pos.)
100V AC,140V DC(3,6 pos.)
30V AC,42V DC(10,12 pos.)
Operation Temperature Range
StorageTemperature Range
-25ç to +85ç
-25ç to +85ç
Characteristic
Specification
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
5m ohms max. (3 pos.)
15m ohms max. (Solder type: 6, 10, and 12 pos.)
30m ohms max. (Through hole type: 6 and 12 pos.)
1000M ohms min.
No flashover or insulation breakdown
4.Vibration
No electrical discontinuity of 10 µs or more
Contact resistance 10m ohms min.(3 pos.)
5.Durability (mating/un-mating) Contact resistance 30m ohms min. (Solder type: 6, 10, and 12 pos.)
Contact resistance 100m ohms min. (Through hole type: 6 and 12 pos.)
6.Temperature cycle Insulation resistance 100 M ohms min.
7.Humidity resistance
Insulation resistance
10M ohms min. (when humidity high)
100M ohms min. (when dry)
Conditions
1A DC
100 V DC
300 V AC / one minute
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
1 cycle= 5min, 10 cycles in each of the 3 directions.
1000 cycles
(-55ç: 30 minutes ^¡ Room temperature: 10 to 15 minutes ^¡ +85ç: 30
minutes ^¡ Room temperature: 10 to 15 minutes) for 5 cycles
96 hours at temperature of 40ohmsC and humidity of 90% to 95%
8.Waterproof performance _{No penetration inside.}
9.Dust protection
While mated with corresponding or protective cap submerged at
depth of 1m for half hour.
sMaterial
Assembly
Component
Plug
Receptacles
Crimp contact
(male/female)
Insulator
Gasket
Contacts
Spring
Insulator
Gasket
Contacts
Hexagonal nut
Washer
Contacts
Material
PPS
PBT
Polyacetal
Silicone rubber, chloroprene rubber
Brass, phosphor bronze
Stainless steel
PPS
Chloroprene rubber
Brass, phosphor bronze
Zinc alloy
Phosphor bronze
Phosphor bronze
Finish
Black
Black
Natural
Red/Black
Gold plated
----------
Black
Black
Gold plated
Chromate
Nickel plated
Selective gold plated
Remarks
UL94V-0
UL94V-0
----------
----------
----------
----------
UL94V-0
----------
----------
----------
----------
----------
sOrdering information
HR 3 0 - 6 P A - 6 S C ⁽* *⁾
1
23 4
56 7
8
1 Series name : HR30
2 Shell size
: Outside diameter/plug mating side
3 Connector type : P : Plug
Connector type : R : Receptacle
Connector type : J : Jack
4 Variation
Blank : Standard
A : Fine wire
5 Number of Contacts : 3, 6, 10 and 12
6 Contact type S
P
: Female contact
: Male contact
7 Contact wiring type
Blank : Solder
C : Crimping
D : Through hole
8 Plating
(71) : Gold plated (Except caps)
2