HR30-6PA-6SC_1 Datasheet, PDF (8/12 Pages) Hirose Electric – Miniature Waterproof Plastic Connectors

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BApplicable Fixtures
qSolder termination fixture
Part Number
HR30-6P-3S-T01
HR30-6P-6S-T01
HR30-6P-6P-T01
HR30-7P-10SC-T01
HR30-7P-12SC-T01
HR30-8P-12PC-T01
HR30-6R-3P-T01
HR30-6R-6P-T01
HR30-6R-6S-T01
HR30-7J-10PC-T01
HR30-7J-12PC-T01
HR30-8J-12SC-T01
CL No.
150-0220-1
150-0214-9
150-0221-4
150-0228-3
150-0223-0
150-0227-0
150-0225-5
150-0218-0
150-0222-7
150-0231-8
150-0230-5
150-0226-8
Applicable Connectors
HR30-6P-3S(71)
HR30-6PA-3S(71)
HR30-6P-6S(71)
HR30-6PA-6S(71)
HR30-6P-6P(71)
HR30-6PA-6P(71)
HR30-7P-10SC(71)
HR30-7P-12S(71)
HR30-7P-12SC(71)
HR30-8P-12P(71)
HR30-8P-12PC(71)
HR30-6R-3P(71)
HR30-6R-6P(71)
HR30-6J-6P(71)
HR30-6JA-6P(71)
HR30-6R-6S(71)
HR30-7J-10PC(71)
HR30-7J-12PC(71)
HR30-8J-12SC(71)
Note : The back shell tightening collar is used to tighten the back shell to the specified torque.
Refer to assembly procedures.
qTightening collar for back shell
Part Number
HR30-6P-T02
HR30-8P-T02
CL No.
150-0216-4
150-0224-2
Applicable Connectors
3 and 6 pos.
10 and 12 pos.
Note: The back shell tightening collar is used to tighten the back shell to specified torque.
Refer to assembly procedures.
Solder termination fixture
Back shell tightening collar
HR30-6P-6S-T01
HR30-6R-6P-T01
8
HR30-6P-T02