FX10A-80P8-SV Datasheet, PDF (9/20 Pages) Hirose Electric – 10 Gbps 0.5mm pitch Stacking Connectors

sHeaders with ground plate
q4mm Stacking Height
FX10 Seriesq10⁺Gbps 0.5mm pitch Stacking Connectors
Unit: mm
Part No.
CL No.
Number of Contacts
A BCDE F
Signal Ground
Remarks
FX10A- 80P/ 8-SV(**) CL570-0001-5-** 80 8 23.5 18 31.1 26.4 31.5 28.3
FX10A-100P/10-SV(**) CL570-0002-8-** 100 10 29.5 24 37.1 32.4 37.5 34.3
With guideposts
FX10A-120P/12-SV(**) CL570-0003-0-** 120 12 35.5 30 43.1 38.4 43.5 40.3
FX10A-140P/14-SV(**) CL570-0004-3-** 140 14 41.5 36 49.1 44.4 49.5 46.3
FX10B- 80P/ 8-SV(**) CL570-0021-2-** 80 8 23.5 18 31.1 — 31.5 28.3
FX10B-100P/10-SV(**) CL570-0022-5-** 100 10 29.5 24 37.1 — 37.5 34.3
Without guideposts
FX10B-120P/12-SV(**) CL570-0023-8-** 120 12 35.5 30 43.1 — 43.5 40.3
FX10B-140P/14-SV(**) CL570-0024-0-** 140 14 41.5 36 49.1 — 49.5 46.3
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
sRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 Not required in products without guideposts.
9