FX10A-80P8-SV Datasheet, PDF (2/20 Pages) Hirose Electric – 10 Gbps 0.5mm pitch Stacking Connectors

FX10 Seriesq10⁺Gbps 0.5mm pitch Stacking Connectors
MSA-100GLH Electrical Interface
sProduct Specifications (Rating)
Rating ^{Rated current}
Note 1
Operating temperature
range
-55 to 85ç
Storage temperature -40 to +60ç
range
(Note 2)
Operating humidity Relative humidity 95% max Storage humidity 40 to 70%
Rated voltage
50 V AC
range
(No condensation)
range
(Note 2)
Note 1: Refer to FX10-168pin derating curves from test reports TR570E-20587.
Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 3: Other information are shown in General Product Specifications.
sReceptacles without ground plate
(P=0.5)
No.a1 No.a2
41.5±0.2
No.a84
No.a83
Unit: mm
0.2±0.05
No.b1
No.b2
49.1±0.3
No.b83
No.b84
(Ø1)
44.4±0.1
Guidepost
(Ø1)
Part No.
FX10A-168S-SV (**)
FX10B-168S-SV (**)
CL No.
570-0244-7-**
570-0254-0-**
Number of Contacts
Signal
Remarks
With guideposts
168
Without guideposts
[Specifications number] -✽ ✽, (✽ ✽)
(83): Embossed tape packaging / AuP 0.76µm
(93): Tray packaging / AuP 0.76µm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
sRecommended Land Pattern
sBoard-to-Board Distance
Dimensions(Metal Mask Dimensions)
Recommended metal mask thickness: 0.15mm
HEADER CONNECTOR
FX10A(B)-168P-SV*(83)
SOLDER 3
PCB
1 Ø1.2±0.05
0.5±0.03
No.a1
No.a2
49.5^+00.1
46.3
0
-0.1
44.4±0.05
41.5±0.05
No.a84
No.a83
Ø1.2±0.05 1
1.45±0.05
No.b2
No.b1
No.b83
No.b84 ^{0.3±0.03(LAND WIDTH)}
0.25±0.03(METAL MASK)
Note 1 Not required in products without guideposts.
RECEPTACLE CONNECTOR
FX10A(B)-168S-SV(83)
FX10A(B)-168P-SV(83)
FX10A(B)-168P-SV1(83)
FX10A(B)-168P-SV2(83)
FX10A(B)-168P-SV3(83)
FX10A(B)-168P-SV4(83)
PCB
SOLDER 3
FX10A(B)-168S-SV(83)
1 (A)
2B
4
4.3±0.127
5
5.3±0.127
6
6.0±0.127
7
7.0±0.127
8
8.0±0.127
Note 1 Stacking height from lead to lead (reference dimensions)
2 Board-to-board distance
3 Stencil (metal mask) shall be based on Hirose's recommended aperture and thickness.
2