FX10A-80P8-SV Datasheet, PDF (13/20 Pages) Hirose Electric – 10 Gbps 0.5mm pitch Stacking Connectors

sHeaders without ground plate
q5mm Stacking Height
FX10 Seriesq10⁺Gbps 0.5mm pitch Stacking Connectors
( 0.5 )
A ±0.2
0.2 ±0.05
B ±0.3
2-(Ø 1)
C ±0.1
Guidepost
Unit: mm
Part No.
FX10A- 96P-SV1(**)
FX10A-120P-SV1(**)
FX10A-144P-SV1(**)
FX10A-168P-SV1(**)
FX10B- 96P-SV1(**)
FX10B-120P-SV1(**)
FX10B-144P-SV1(**)
FX10B-168P-SV1(**)
CL No.
CL570-0141-4-**
CL570-0142-7-**
CL570-0143-0-**
CL570-0144-2-**
CL570-0151-8-**
CL570-0152-0-**
CL570-0153-3-**
CL570-0154-6-**
Number of Contacts
ABCDE
Signal
Remarks
96
23.5 31.1 26.4 31.5 28.3
120
29.5 37.1 32.4 37.5 34.3
With guideposts
144
35.5 43.1 38.4 43.5 40.3
168
41.5 49.1 44.4 49.5 46.3
96
23.5 31.1 — 31.5 28.3
120
29.5 37.1 — 37.5 34.3
Without guideposts
144
35.5 43.1 — 43.5 40.3
168
41.5 49.1 — 49.5 46.3
[Specifications number] -✽ ✽, (✽ ✽)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
sRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
D
+0.1
0
E
0
-0.1
2 Ø1.2 ±0.05
C ±0.05
A ±0.05
2 Ø1.1 ±0.05
0.5 ±0.03
1.45 ±0.05
0.3 ±0.03(Land)
0.25±0.03(Metal mask)
Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
13