FX10A-80P8-SV Datasheet, PDF (8/20 Pages) Hirose Electric – 10 Gbps 0.5mm pitch Stacking Connectors

FX10 Seriesq10⁺Gbps 0.5mm pitch Stacking Connectors
sGeneral Product Specifications
Rated current
Rating
Rated voltage
0.3 A
50 V AC
Operating temperature range -55 to 85ç (Note 1) Storage temperature range -10 to +60ç (Note 2)
Operating humidity range
Relative humidity 95% max
(No condensation)
Storage humidity range
40 to 70% (Note 2)
Item
Requirements
Conditions
1. Insulation resistance 100 M ohm min
Measured at 100 V DC
2. Voltage resistance No flashover or breakdown
150 V AC applied for one minute
3. Contact resistance 60 m ohm max
Measured at 100 mA
4. Vibration
No electrical discontinuity for 1µs min
No damage, cracks, or parts looseness
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10
cycles each
5. Shock
No electrical discontinuity for 1µs min
No damage, cracks, or parts looseness
Acceleration of 490 m/s², 11 ms duration, sine half-wave
waveform, for 3 cycles in the both directions of each of the 3 axes
6. Damp heat
(Steady state)
Contact resistance of 70 m ohm max, insulation resistance of
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
100 M ohm min, no damage, cracks, or parts looseness
Contact resistance of 70 m ohm max, insulation resistance of Temperature: -55ç ¡ 15 to 35ç ¡ 85ç ¡ 15 to 35ç
7. Temperature cycle
100 M ohm min, no damage, cracks, or parts looseness
Time: 30 min. ¡ 2 to 3 min. ¡ 30 min. ¡ 2 to 3 min. for 5 cycles
8. Durability
Contact resistance of 70 m ohm max
No damage, cracks, or parts looseness
50 times
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
No melting of resin portion which affects performance
Soldering iron temperature: 360ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 3: Information contained in this catalog represents general requirements for this series. Contact us for the drawings and specifications for a
specific part number shown.
sMaterials
Part
Insulator
Contacts
Ground plate
Metal fitting
Material
LCP
Phosphor bronze
Phosphor bronze
Phosphor bronze
Header
Receptacle
Process
Beige
Contact Area: Gold plating
Lead Area: Tin plating
Contact Area: Gold plating
Lead Area: Flash plating
Tin plating
Tin plating
Notes
UL94V-0
---
---
---
sOrdering Information
FX10 # - ✽ P / ✽ - SV 1 (✽ ✽)
1
2
4
56
7
3
1 Series name : FX10
2 Form symbol
A : With guide post
B : Without guide post
3 Number of contacts
With ground plate
Signal/Ground: 80/8, 100/10, 120/12,
140/14
Without ground plate
Signal: 96, 120, 144, 168
4 Connector type
P : Header
S : Receptacle
5 Contact form
SV : Straight SMT
6 Product height
Blank : Standard
1
: Standard + 1mm
7 Packaging classification
Blank, (71) : Tray packaging
(21), (91): Embossed tape packaging
8