IC11S-68PL-1.27SF-EJR Datasheet, PDF (25/38 Pages) Hirose Electric – Single Slot SMT Connectors For Card-Bus Based PC Cards

Single Slot SMT Connectors For Card-Bus Based PC Cards
IC11S Series (New POP-UP Button)
PC Card Standard Compliant
Reduced height : 5.6mm high
sFeatures
1. PC Card Standard compliant:
• Grounding is required to meet the high speed signal requirements
of the PC card standard. Grounding reliability is achieved with a
grounding plate and 8 grounding contacts.
• Type1, type2and type3cards are covered.
• Terminals for ground clipping are provided.
2. Reduced pattern-inhibited area
Pattern-inhibited area is reduced,compared to our conventional
product.
3. Light-Weight
Approx. 12% of weight reduced.
Compared to conventional type, it only weighs 13.1g for standard
type with 0mm standoff.
4. Reduced Height:
Connector height is minimized to 5.6mm, making possible thinner
product designs.
5. Eject mechanism with high-level functionality
Hirose Electric's original ejection mechanism provides an higher
degree of card ejection over existing products. This improves the
operational qualities of card removal. (Patents pending)
6. Wide Variety of Options Available
• Standard type mounts to the top of the PC board and reverse type
mounts on the underside of the board
• Three types of eject buttons; rigid, flexible and POP-UP.All types
can be installed on the right or left side of the ejector.
• Available with standoff to utilize space under the connector for
mounting other parts.
Wide variety of options
(1)Board Mounting
➀Standard type
➁Reverse type
(2)Position of eject buttons
➀Right
➁Left
(3)Standoffs
➀0.0mm
➁2.2mm
Standard type
Reverse type
A26